The visible light spectra of the EcoPlasma™
is very similar to the sun’s however, compared to all other
lighting technologies the ultraviolet and the infrared of the EcoPlasma™
is very low.
The EcoPlasma™ is especially suited to all environments where
light quality is essential; The colour temperature of the bulb is
designed for high definition filming and broadcasting, with a true
full spectrum ideal for human beings in Hospitals, Schools, Stadiums,
Land, Water and Air Traffic Control maximising alertness and visual
acuity, in fact anywhere there are living things there should be
an EcoPlasma™ making them healthy.
The fan inside the plasma lamp utilises a high temperature motor
design from Japan ensuring a long lifetime of at least 20,000Hrs.
The technical grade magnetron used has been adopted so that it
has a conversion efficiency of over 75% (industrial grade is about
70%) and because of the TSLZ management technology can also expect
to have a long lifetime of at least 20,000Hrs.
Several newly implemented design ideas have been used in the EcoPlasma™’s
microwave system, lighting source system and the light distribution
system, so the EcoPlasma™’s generally have 20% higher
light efficiency than similar lighting products manufactured elsewhere.
The EcoPlasma™ uses its particular resonant power conversion
technique; it not only can achieve more than 93.5% efficiency but
also has exceptionally high reliability due to fundamental design
innovations. There is no electrolytic capacitor in the AC/DC conversion
stage, so the inverter can run for more than 100,000Hrs before the
time to first failure.
The EcoPlasma operational environment temperature can
be up to 60°C and it can cope with grid voltage ripple from
-20% to +30%. We know of no other light source that can reach this
top level performance.
The EcoPlasma™ is available with step-less light dimming
function (30% to 100%), which you can manually adjust using a rotating
or sliding variable resistor. Alternatively the MCU can be adjusted
remotely using a control signal between 0V-2.5V
The light quality and efficiency of the EcoPlasma™ is far
greater than classical light sources such as incandescent lamp (Pb),
fluorescent lamp, high pressure mercury vapour lamp, high pressure
sodium vapour lamp, Induction lamp and LED’s (As).
The EcoPlasma™ offers environmental protection as there
is no need for lead (Pb) arsenic (As) or mercury (Hg) vapour for
the device to work.
The EcoPlasma™ 900W (EP900) has frequently exceeded its standard
specification producing excellent luminous efficiencies of more
than 150lm/W. One EP900 can take the place of 400 pieces of 60W
incandescent lamps or 300 pieces of 40W common fluorescent lamps
Because of the high colour rendering property, EP900 is approximately
two times better than 1kW ceramics metal halide lamp made by Philips.
The EcoPlasma™ has superior colour rendering properties
compared to all the other man-made light sources. On full
power the colour rendering index can reach over 90 and excel the
classic light source. The spectra of EcoPlasma™ is truly continuous,
very well-proportioned and very similar to the Sun’s. The
output light energy curve is stable and the peak value is near 500nm,
so the colour appears pure white to humans.
Visual clarity and acuity is at its peak for
humans seeing with EcoPlasma light. For example; people can see
words with 1.5mm high characters clearly and easily to read newspapers
and books that may be as far as 70m from EcoPlasma when fitted with
the 600mm calibre reflector system.
Higher luminous flux maintenance ratio
During its entire lifetime the EcoPlasma keeps a very stable luminous
flux, so there is a massively higher luminous flux maintenance ratio
to the EcoPlasma than all other lamps.
The diagram below shows the maintenance ratio contrast of some
lamps. The relationship to the id numbers are: |
